Moroso 72036 Equivalent Self Vulcanizing Tape – Red Oxide – 1X10 Made In The USA
Specifications
| Return Shipping Will Be Paid By | Buyer |
| Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | Moroso |
| Other Part Number | PA2146RO |
| Our Part Number | MOR72036 |
| Type | Self Vulcuning Tape |
| Interchange Part Number | MOR-72036 |
| Manufacturer Part Number | 72036 |
| Part Type | Self Vulcuning Tape |
Moroso Equivalent Self-Vulcanizing Tape, Red Oxide 10' x 1" Roll Self-Vulcanizing Tape 10 Ft Roll x 1 Inch Wide High dielectric strength, high-temperature silicone tape wraps around ignition wire, boots and connectors to provide added insulation Extra insulation keeps spark energy contained within the wire, preventing high-voltage leaks and resulting misfire Also seals out moisture, while protecting the wire from the harmful effects of oil and excessive heat Specially formulated silicone rubber vulcanizes automatically, providing adhesion when tape surfaces make contact An excellent alternative to applying shrink sleeves and insulated wire sleeving One-inch wide tape packaged in 12-foot rolls· Dielectric Strength: 400 volts per mil (vpm)· Operating Temperature: -60F to 500F (-51.11C to 260C)· Water Absorption 3% Max. by Weight· MIL-SPEC: Meets A-A-59163· Tensile Strength: 700 psi (Kg/cm 49.226)· Elongation: 300%· Width & Length 1X10 (2.54000cm X 3.04800m) Installation Instructions forSelf Vulcanizing Fusing TapeInstallation Instructions:1. Clean surface that the tape will be applied to.2. Make two wraps where the tape begins. Spiral the tape with a slight pull to ensure a tight bond.3. When the area is covered, make two wraps at the end to seal the tape.
Related Items
