Hand Laminated Fiberglass ConstructionReady To Fit, Sand, Prime & PaintImages Are For Reference OnlySpecify Year (53-54 or 55) When it comes to fiberglass body parts, these hand laminated fiberglass are unsurpassed. You will find these Corvette fiberglass body panels are made of the finest automotive grade resins, 1-1/2 oz. mat (3 layers) and 21 mils of soft-sanding gelcoat. These panels are wave-free because of the heavily reinforced molds and they are allowed to cure 24 hours before being pulled from the molds. There are other manufacturers of Corvette body parts, but you’ll find these hoods are unequaled in the industry for consistent fit, finish and ease of installation. These parts are shipped from the main vendor/manufacturer of said item. These are made-to-order body parts and generally take approximately 4-8 weeks for production. Production will not start until payment is received. Please contact us to check availability. Shipping is determined by zip code. Freight Companies REQUIRE a phone # to schedule a delivery. Contact us for a shipping quote or questions. As with all parts, PLEASE SPECIFY YEAR when ordering.Order Cancellation / Order Adjustment Requests:Made per order parts cannot be cancelled once it has been 3 days since the order was placed or if they are in production. A cancellation fee of 25% will apply to your refund request should it be accepted. Order cancellation requests for change of mind, ordered wrong or ID verification declination for security verification procedures will also be subject to a 5% credit card processing fee held-back from the refund. There will be NO EXCEPTIONS.Please Call for a Freight Quote Before Clicking the Buy It Now Button Hours are Monday thru Friday 9:00AM to 9:00PM Eastern Time We Accept Visa-Mastercard-Discover and PayPal *The estimated delivery time is based on the seller’s handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
1965 1966 Corvette – One Piece Fiberglass Front Clip With 1.5″ Built In Flares
Corvette Custom Fiberglass Front Clip 1965-1966 1.5″ Flare C2 We recommend our inner fender extension to accommodate for the space between the inner fender and side fender. Product number 871Note: ALL C2 Front Clips are build with the fenders separate for easier install. Please watch video below for more explanation! PERFECT FOR A RESTOMOD, OR ANY OTHER CUSTOM CORVETTE BUILD, OUR CUSTOM FRONT CLIP HAS 1.5 INCH FLARES ALREADY BUILT INTO THEM AND COMES WITH THE HEADLIGHT SUPPORTS AND HEADER BAR ALREADY INSTALLED! Firewall, Inner Fender and Extensions are available for purchase in our Engine Block Off Kit Note: If you purchase Engine Block Off Kit with Front Clip, you must also purchase Inner Fender Extensions to reach from Inner Fender to inside of the Front Clip To purchase those items, check out their listings! https://www.ebay.com/itm/401742588492 Our parts make any Street Rod, Restomod, Pro Street, Classic or Custom Corvette stand out from the crowd! New layout for front clips! – YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] Dynamic Corvettes Located in Saginaw Michigan since 1983, we are family owned and operated specializing in only Corvettes Our fiberglass parts are manufactured in house and only sold by us All parts are made of high quality Vinyl Ester Resin and Chop Strand Mat and come out of the mold with a Class A finish We go to great lengths to build a high quality part. We test fit to a minimum of 3 never wrecked Corvettes then we take the average of the 3 to tool from. It is imperative to remember we are working with 40 plus year old vehicles and back then the GM quality specs varied greatly compared to today’s standards Better to purchase one of our parts, or else with our competitors you will have to bodywork everything Altered parts are non-returnable. No returns after 30 days Returns must have a return authorization number (RA#) This will be provided to you through eBay message system. Please write RA# on the outside of box. A copy of your invoice must accompany all returns. Customer is responsible for return shipping/freight cost. You will not be able to scuff and paint. Test fitting is required prior to bodywork as well as throughout the bodywork process. The likelihood of having to bodywork adjacent panels for the proper fit is very high and it is recommended a qualified Corvette Specialist install these parts. Our Products We ARE The manufacturer. And we are constantly adding new custom products to our catalog for C1, C2, and C3 Corvettes. Click the «Visit Store» link at the top right of this listing to see our entire product line.
1967 Corvette – One Piece Fiberglass Front Clip With 1.5″ Built In Flares
Corvette Custom Fiberglass Front Clip 1967 1.5″ Flare C2 Made In the USA! We recommend our inner fender extension to accommodate for the space between the inner fender and side fender. Product number 871 PERFECT FOR A RESTOMOD, OR ANY OTHER CUSTOM CORVETTE BUILD OUR CUSTOM FRONT CLIP HAS 1.5 INCH FLARES ALREADY BUILT INTO THEM AND COMES WITH THE HEADLIGHT SUPPORTS AND HEADER BAR ALREADY INSTALLED! Note: ALL C2 Front Clips are build with the fenders separate for easier install. Please watch video below for more explanation! Our parts make any Street Rod, Restomod, Pro Street, Classic or Custom Corvette stand out from the crowd! New layout for front clips! – YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] Dynamic Corvettes Located in Saginaw Michigan since 1983, we are family owned and operated specializing in only Corvettes Our fiberglass parts are manufactured in house and only sold by us All parts are made of high quality Vinyl Ester Resin and Chop Strand Mat and come out of the mold with a Class A finish We go to great lengths to build a high quality part. We test fit to a minimum of 3 never wrecked Corvettes then we take the average of the 3 to tool from. It is imperative to remember we are working with 40 plus year old vehicles and back then the GM quality specs varied greatly compared to today’s standards Better to purchase one of our parts, or else with our competitors you will have to bodywork everything Altered parts are non-returnable. No returns after 30 days Returns must have a return authorization number (RA#) This will be provided to you through eBay message system. Please write RA# on the outside of box. A copy of your invoice must accompany all returns. Customer is responsible for return shipping/freight cost. You will not be able to scuff and paint. Test fitting is required prior to bodywork as well as throughout the bodywork process. The likelihood of having to bodywork adjacent panels for the proper fit is very high and it is recommended a qualified Corvette Specialist install these parts. Our Products We ARE The manufacturer. And we are constantly adding new custom products to our catalog for C1, C2, and C3 Corvettes. Click the «Visit Store» link at the top right of this listing to see our entire product line.