2 sheets of material. This is. 006″ thickness. 505 Fiber is a general-purpose cellulose fiber gasket material impregnated with. Thickness Increase, % 5. Thickness Increase, % 30. MATERIAL SPECIFICATIONS – Typical Values (.006”).
Vintage Kart Briggs McCulloch Gasket Material .010″ Thickness 2 Sheets
2 sheets of material. Each sheet is approx. 9-1/2″ x 14″ in excellent condition. This is. 010″ thickness. Thickness Increase, % 5. Thickness Increase, % 30. MATERIAL SPECIFICATIONS – Typical Values (.010”).
Briggs McCulloch Gasket Material N-8092 .047″ Briggs Stratton McCulloch 2 Sheets
N-8092 used in automotive, small engine, and compressor applications. It has excellent crush resistance at high flange pressures, and excellent sealing properties with oil, fuel, and water. It is intended for applications with short duration maximum temperatures up to 180oC (350oF).
Interface Solutions CS-301 Nonasbestos Gasket Material .031″ thickness 2 Sheets
CS-301 has a controlled-swell styrene butadiene rubber binder. It is intended for use in applications with water, high analine point oil, and other applications not including aromatic fuels and certain solvents, and with short duration maximum temperatures up to 180o C (350o F)Spec sheet below 2 sheets. Each sheet is approx. 9″x13″, thickness=.031, and in excellent condition. This material is far superior to the gasket material available in auto parts stores and hardware stores. Superior material and used hugely in industrial manufacturing of internal combustion engines.Specification PropertiesPropertyValueMethodDensity, g/cc(lb/cu.ft)0.61 (38) (min.)ASTM F 1315Compressibility, % (at 6.9MPa)25-40ASTM F 36Recovery, %30 (min.)ASTM F 36Tensile Strength, AMD, MPa(psi)4.83 (700) (min.)ASTM F 152Fluid Resistance, IRM903 Oil ASTM F 146 Change in Thickness, %30 (max.) Change in Weight, %105 (max.) Fluid Resistance, Fuel B ASTM F 146 Change in Thickness, %35 (max.) Change in Weight, %95 (max.) Fluid Resistance, Distilled Water ASTM F 146 Change in Thickness30 (max.) Change in Weight60 (max.) Binder TypeStyrene Butadiene Remarks and Related Documents:Specification values determined by the test methods required for ASTM F-104, Type 3 materials.